Cut vinyl made for neat lines and clean edges
Our vinyl cutting service is used for lettering, logos, direction signs, safety messages and window graphics where a sharp edge matters more than a printed image. We cut adhesive vinyl to size from artwork supplied by you or prepared by our in-house team, then weed, tape and finish it for application on smooth painted walls, glass, aluminium panels, trailers and vehicle panels. For outdoor use in Rustenburg the film choice matters, because sun, dust and wind can shorten the life of cheaper material if the job is not specified correctly.
We cut single-colour vinyl for strong contrast and easy reading, and we also cut layered jobs where different colours are applied separately. Standard cut depth follows the film thickness and we keep small text practical, because fine detail on rough walls or dusty glass can lift early. Typical work includes shop names, compliance markings, operating hours, office door labels, load area notices and clinic or school wayfinding.
- Cut vinyl lettering and logo shapes
- Window graphics for glass doors and displays
- Directional and safety signage
- Vehicle decals and unit markings
- Wall text for offices, schools and reception areas
What is included with each vinyl cutting job
Every order is checked for size, surface and intended use before we cut anything. That means we confirm whether the job is for indoor or outdoor exposure, whether the surface is flat or slightly curved, and whether the sign will face direct sun, rain or repeated cleaning. For mine sites and industrial yards we also consider visibility distance, reflective needs and basic site rules around access and mounting. If the surface is powder-coated, painted or glass, we prepare the artwork and cutting method to suit it.
Included in a standard vinyl cutting job is artwork scaling, cutting on the correct film, weed removal, application tape where needed, and advice on installation. For larger jobs we can handle banner finishing or sign installation as part of the same order. If the project needs multiple panels, measured repeats, or a mix of colours, we split the artwork so the final fit is easier and cleaner.
- Artwork size check and layout correction
- Vinyl selection for indoor or outdoor use
- Cutting, weeding and application tape
- Panel matching for longer runs or repeats
- Optional delivery and on-site setup
How we run the process from file to fitment
We keep the process simple. First, we receive your artwork or prepare it from a logo, sketch or reference photo. Next, we check the text size, stroke width and spacing so the cut lines remain stable once weeded. If the file needs cleaning up, Mpho in our graphics team adjusts it before production. After approval, Johan and the production crew cut the vinyl, weed the excess and prepare the panels for handover or installation.
For fitment jobs, Jurie and the installations team work from site measurements and surface prep notes. Glass is cleaned and degreased, walls are checked for dust or flaky paint, and vehicle panels are inspected for wax or grime. On sites with high traffic or dusty conditions we recommend fitting earlier in the day or in a sheltered area where possible. A little patience on prep saves rework later, especially on smooth surfaces that seem easy but are not.
- Step 1: send measurements, artwork or a sample
- Step 2: we confirm sizing, finish and placement
- Step 3: artwork is set up and approved
- Step 4: vinyl is cut, weeded and prepared
- Step 5: collection, delivery or site fitment
Turnaround times for urgent and planned work
Turnaround depends on the size of the order, the amount of artwork correction and whether installation is required. Small cut vinyl jobs such as door lettering, basic decals and standard directional signs can often move quickly once the artwork is approved. Larger runs for schools, mines and contractors need more time for checking, cutting and packing, especially when there are many repeated panels or separate site locations.
As a guide, simple jobs may be ready within 1 to 3 working days. Medium jobs with layout work or multiple colours can take 3 to 5 working days. Larger site packs, vehicle sets or high volume orders should be booked ahead so we can schedule production and fitment properly. During busy periods or before public holidays, we advise clients to send details early because last minute work usually means less room for clean revisions. Weather also matters for outdoor fitting, especially in windy or wet conditions around Rustenburg and the surrounding areas.
- Small decals and lettering: 1 to 3 working days
- Multi-panel or mixed colour jobs: 3 to 5 working days
- Site rollouts and larger orders: by arrangement
- Installation dates depend on site access and weather
Pricing based on size, film type and complexity
Vinyl cutting is priced according to square metre coverage, the number of colours, the amount of detailing and whether the job needs installation. Short words in bold lettering cost less to produce than fine script, repeated serial numbers or large sets of labels. If the job includes removal of old vinyl, difficult access or work at height, that is priced separately. We keep quotes practical and itemised so you can see what is covered before you approve the work.
For repeat customers and bulk site work, we can quote per panel, per sign or per metre depending on what is easier for procurement. Schools and mines often prefer fixed scope pricing for branch rollouts or maintenance orders, while smaller businesses may want a quick price on a few decals only. If you need a durable outdoor finish, we will recommend the right film rather than cheapest one, because replacing failed vinyl after a few months usually costs more in the end.
- Quoted by size, colour count and artwork detail
- Installation and surface prep priced separately where needed
- Bulk and repeat work can be quoted per set or per metre
- Outdoor durability affects film choice and cost
Care, lifespan and maintenance intervals
Well-fitted cut vinyl can last for years, but the lifespan depends on sun exposure, cleaning habits and the surface condition underneath. In Rustenburg, dust and strong sun can dry the edges faster, so we advise clients to inspect high-use signs every 6 months. On vehicles and exposed outdoor signs, a quick check after the first 2 to 4 weeks is useful to confirm that edges have settled properly. If a corner starts to lift, it is easier to fix it early than after dirt gets under the film.
For routine cleaning, use a soft cloth with mild soap and water. Avoid abrasive pads, strong solvents and high pressure water aimed directly at the edges. Do not scrub new vinyl too soon after fitment, and avoid sticking tape over fresh decals unless necessary. On sites near heavy dust or coastal humidity, surface cleaning should be slightly more frequent. Most clients keep a simple maintenance cycle of visual checks every 6 months and replacement planning every 2 to 5 years depending on exposure.
- First check: 2 to 4 weeks after fitment
- Routine inspection: every 6 months
- Outdoor replacement planning: 2 to 5 years
- Wipe vinyl with mild soap and a soft cloth
Key facts
| Material options | Indoor and outdoor adhesive vinyl, opaque or translucent |
|---|---|
| Minimum practical text | About 10 mm for simple lettering, larger for rough surfaces |
| Finish options | Gloss, matt, clear transfer tape and layered colour work |
| Typical cut size | Single decals to full panels and shopfront lettering |
| Surface suitability | Glass, painted walls, aluminium, plastic and vehicle panels |
| Turnaround | 1 to 5 working days depending on size and setup |
